{"version":"https://jsonfeed.org/version/1","title":"Archon's Table","home_page_url":"https://archonstable.com","description":"Archon's Table","author":{"name":"Archon's Table"},"items":[{"id":"test-prints-are-done","html_content":"<img src=\"https://img1.wsimg.com/isteam/ip/58adac1d-6592-41e9-90a9-00c717133bad/Full%20Pack.PNG\"/><p>Test Printing Completed</p>","url":"https://archonstable.com/wall-of-holding/f/test-prints-are-done","title":"Test Prints are Done","date_modified":"2026-02-10T16:40:48Z"},{"id":"re-design-update","html_content":"<img src=\"https://img1.wsimg.com/isteam/ip/58adac1d-6592-41e9-90a9-00c717133bad/Floors.PNG\"/><p>Update!!!</p>","url":"https://archonstable.com/wall-of-holding/f/re-design-update","title":"Re-Design Update","date_modified":"2026-02-05T15:48:53Z"},{"id":"wall-of-holding-delayed","html_content":"<img src=\"https://img1.wsimg.com/isteam/ip/58adac1d-6592-41e9-90a9-00c717133bad/_MG_6494.jpg\"/><p>Unfortunately, we've encountered some unexpected issues while test-printing the Wall of Holding. Sometimes the model's corners warp during printing. With our slide rail system, even a slight warp can make it impossible t...</p>","url":"https://archonstable.com/wall-of-holding/f/wall-of-holding-delayed","title":"Wall of Holding Delayed","date_modified":"2026-02-04T21:53:08Z"}]}